Choppy audio, robot voices, a delay that makes people talk over each other, or calls where one side hears nothing at all: bad call quality is one of the most frustrating IT problems, because it is hard to reproduce and everybody blames someone else – the provider, the phone system or the internet line.
What actually goes wrong
A VoIP call is a stream of small audio packets, 50 per second in each direction. Three things decide how it sounds:
- Packet loss: packets that never arrive. Above a few percent, words go missing.
- Jitter: packets arriving at uneven intervals, which makes audio choppy.
- Delay: the time a packet needs to travel. Up to about 150 milliseconds one way is fine; beyond that conversations become awkward.
The cause can be a saturated upload when someone sends a large file, an overloaded Wi-Fi network, a faulty switch port, the route to the SIP provider, or a router doing NAT badly.
Measuring instead of guessing
Tactical-IT uses its own call-quality monitor: a small device connected to your network that measures every call on both legs – between the phone and the PBX, and between the PBX and the provider – and lines that up with continuous measurements of your internet line. For each poor call you get a plain-language explanation of where the problem lies and what to do about it.
Struggling with call quality? Contact us and we will find the cause.